Stair Repair in Greensboro, NC

Concrete steps take more environmental abuse per unit of surface than any other slab on the property. Water sheets across the tread and pools at the bull-nose. Freeze-thaw hits the exposed edges before the interior of the slab even feels a temperature change. Rusted tie-rods swell and split the risers open from the inside. A run of stairs that looked fine at year fifteen can spall a bull-nose, separate from the porch, or drop the bottom riser over a single hard winter. The repair choice depends entirely on what failed and how far it has progressed.

Local Concrete Contractor repairs concrete steps and stair runs across North Carolina — front porches, side entries, garden step cascades, and light-commercial entrance stairs. Every job starts with a look at the whole run, not just the flagged spall — because bull-nose failure on one tread often means the risers below it are already compromised too. That walk becomes a written spec: which treads get patched, which risers get rebuilt, whether the footing needs work, and whether the run is past the point where repair still buys real time. You see the number and the scope behind it. Zero deposit.

Our Stair Repair Services

Stair repair work covers a range from a single spalled bull-nose patch to a full poured-in-place rebuild, and getting the diagnosis right is what determines whether the repair holds up or comes back within a season.

• Bull-nose replacement — grinding the failed edge back to sound concrete and rebuilding the nose with a bonded repair mortar
• Tread patching on localized spalling or corner breaks where the underlying slab is still sound
• Riser rebuild — form and re-pour a failed riser face where separation or cracking has opened the joint
• Tie-rod replacement — cut out corroded tie-rods that are swelling and splitting the riser, install new stainless or epoxy-coated rods
• Step-to-porch tie-in repair where the stair has separated from the porch slab
• Bottom-riser rebuild where the base or footing has settled and dropped the first step
• Footing rework — expose the existing base, cut back failed concrete, re-pour a proper pier to below frost line
• Handrail post repair where the anchor has rusted and split the tread
• Full poured-in-place stair replacement when the run is past the point of practical repair
• Precast stair replacement on straight side-entry runs where the geometry suits it

We walk the whole run before quoting, because bull-nose spalling on one tread is often a signal that the entire top course is already compromised, and pricing only the visible damage almost always leads to a repeat visit.

Why Concrete Steps Fail — Freeze, Tie-Rods, and Footings

Concrete stairs fail in three main ways, and each one calls for a different repair strategy. Understanding which mode is driving the damage tells you whether patching solves it or just delays a full rebuild.

Freeze-thaw damage on the bull-nose. The tread edge is the thinnest part of the step, water sheds across it after every rain, and a north or east facing porch takes repeated freeze cycles against that exact corner all winter. Under-thick nosing on the original pour or a bad early-freeze after pour makes the failure faster. Repair is a bonded bull-nose rebuild with a repair mortar rated for freeze-thaw exposure.

Tie-rod corrosion. Many older concrete stair runs — particularly precast units and some poured-in-place forms — used steel tie-rods to hold the risers together during the pour. As the rods rust, they swell, and the swelling force cracks the riser or tread from the inside. The tell-tale sign is a horizontal rust stain leaching out of a hairline crack. Repair means cutting out the corroded rod, sleeving in a stainless or epoxy-coated replacement, and patching the concrete back.

Footing failure. Tall stair runs that were poured without a footing to below frost line eventually settle, tip, or pull away from the porch. Repair here is not surface work — the footing has to be exposed, cut back to sound base, and re-poured as a proper pier. On the worst cases the entire stair comes out and gets rebuilt on the new footing.

Matching the repair to the failure mode is what separates a fix that lasts fifteen years from one that comes back the next winter.