Best Concrete Basketball Court Contractors Greensboro NC

Play quality traces straight to pour quality. The dribble test is merciless: any wave in the slab returns the ball at an angle a player feels immediately, so court pours prioritize plane accuracy over speed. The hoop needs its own engineering — a footing separated from the slab, deep enough that hanging on the rim and years of wind load never crack the playing surface around the post. Finish sits in a narrow band, textured for traction but smooth enough for handles. On Greensboro lots we also think about containment and neighbors early, placing the court where errant shots stay home.

In Greensboro specifically, basketball court work runs through neighborhoods like Irving Park, Lindley Park, Sunset Hills. In pre-war neighborhoods like Fisher Park, Sunset Hills, and Westerwood, we mostly replace original slabs that have reached the end of their life, working around mature oak roots that heave sidewalks and aprons. That local ground truth — not a generic spec sheet — is what the crew builds against when they form up a Greensboro court pour.

Basketball Court Slab Sizes and Specs We Pour

Court size is a mix of what you want to play and what actually fits in the yard. Getting the slab spec right for the size and use pattern makes the difference between a court that plays like a real court and one that spider-cracks by year three.

• Hoop pad — 30×30 (900 SF), room for a hoop plus a solid free-throw shooting area and enough space to move for one-on-one
• Backyard half court — 30×50 (1,500 SF), enough for a painted key, three-point line, and adult-scale play
• Regulation-style half court — 50×47 (2,350 SF), full NBA half-court dimensions with three-point arc, key, and full baseline run
• Small full court — 50×74 (3,700 SF), high-school-style shortened full court
• Regulation full court — 50×94 (4,700 SF), NBA/college full dimensions, typically HOA or club scope
• Driveway-conversion court — existing driveway extended or repoured to hit court dimensions
• Multi-sport pad — basketball plus pickleball line overlay on 30×60 or 34×64

Every slab we pour hits the same core spec: 5-inch minimum thickness (6 inches on courts with in-ground hoop bases embedded through the slab), 4,000 psi mix, #4 rebar on 16-inch centers, sawcut control joints on a 12×12 grid, 1% slope in one direction for drainage (side-to-side is standard, never toward the hoop-side sideline), broom or steel-trowel-then-broom finish depending on the surfacing plan, and cast-in-place hoop footings poured before or with the slab pour.

Base Prep, Drainage, and Why Most Courts Crack Early

The single biggest reason a basketball court fails early is the base underneath the slab. A pad poured directly on unimproved subgrade or on 2 inches of loose stone will telegraph settlement cracks within a year, and the point-load of a heavy in-ground hoop base makes the failure worse — the slab sinks unevenly under the hoop before it does anywhere else.

Our base spec: strip 8-10 inches of topsoil, compact the subgrade to 95% Proctor, install and grade 4-6 inches of #57 washed stone as a drainage layer, compact again in 2-inch lifts, then pour on top. Under the hoop location specifically we go deeper on the stone base (6-8 inches) because a full-size in-ground hoop with a 4×4×48-inch anchor footing puts serious localized load on that spot every time the rim gets used.

Drainage direction matters. The slab must fall 1% (about 1 inch of drop over 8 feet) in one direction so water sheds off the pad. Sloping toward the hoop creates a puddle right where you shoot free throws every time it rains, and a dead-flat court holds water at the low spots and shortens surface life. Perimeter drainage — a French drain along the low side, or at minimum a graded swale directing water 10 feet clear of the pad — keeps the base dry season after season.